Nortel Networks NN43001-563 User Manual
Page 12
12
Contents
Add an IP Trunk 3.01 (and later) node on TM 3.1 by retrieving an existing node
Retrieve and add an IP Trunk 3.01 (and later) node for administration
Retrieve and add an IP Trunk 3.01 (and later) node for maintenance and diagnostic
Retrieve IP Trunk 3.01 (and later) configuration information from the IP Trunk
Schedule and generate and view IP Trunk 3.01 (and later) OM reports
Disable the indicated IP trunk card
Disable the indicated IP trunk card when idle
Enable an indicated IP trunk card
Disable an indicated IP trunk card port
Enable an indicated IP trunk card port
Display IP trunk card ID information
Display IP trunk card port status
OA and M using the ITG shell CLI and overlays
ITG Shell OA and M procedure summary
Access the ITG shell through a maintenance port or Telnet
Connect a PC to the card maintenance port
Telnet to an IP trunk card through the TM 3.1 PC
Change the default ITG shell password to maintain access security
Reset the default ITG shell password
Download the ITG operational measurements through the ITG shell
Reset the operational measurements
Display IP Trunk 3.01 (and later) node Properties
Display IP Trunk 3.01 (and later) Gatekeeper status
Transfer files through the Command Line Interface
Upgrade IP trunk card software using FTP
Backup and restore from the CLI
Recover the SNMP community names
IP Trunk 3.01 (and later) configuration commands
Download the IP Trunk 3.01 (and later) error log
Disable the indicated IP trunk card
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.