Nortel Networks NN43001-563 - Manual (Page 291)

Add a site and system 291
Figure 78
Select a system type
The New System Properties window opens. This window enables
system-wide values to be provisioned.
3 Click the General tab. An empty New System Properties window
opens. See
Figure 79 "Empty New System Properties window"
(page 291) .
Figure 79
Empty New System Properties window
The General properties must be provisioned before any other site
properties, as the information on the General tab pertains to the
entire system and all IP Trunk nodes on the system.
4 Give the system its own unique name. If the system is co-located
with the site, as in this example, select the Same as Site check box.
The rest of the information is obtained from the site information and
is entered automatically. See
Figure 80 "New system properties –
General tab" (page 292) .
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.