Nortel Networks NN43001-563 - Manual (Page 324)

324 Provisioning IP Trunk 3.01 (and later) in TM 3.1
Figure 117
ITG Dialing Plan, Remote Node Properties window, General tab with drop-down list open
An existing destination node can also have its properties changed
from the drop-down list. See
Figure 118 "Change properties on
an existing destination node" (page 324) . In that example, the
properties are being changed for the Johnny Carson node.
Figure 118
Change properties on an existing destination node
3 Before entering data (for example, number plan, type of number,
digits) for a specific address, the destination node must be selected.
The destination node can be selected in one of the following ways:
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.