FUJITSU MB91F109 FR30 - Manual (Page 341)

317
14.10 One-Shot Operation
14.10 One-Shot Operation
One-shot operation outputs a single pulse.
■ One-Shot Operation
Upon detection of a trigger in one-shot operation mode, the PWM timer can output a single
pulse of arbitrary width.
When an edge is detected during operation while restart is enabled, the counter is reloaded.
Figure 14.10-1 shows a timing chart for one-short operation performed while trigger restart is
disabled. Figure 14.10-2 shows a timing chart for one-shot operation performed while trigger
restart is enabled.