FUJITSU MB91F109 FR30 - Manual (Page 211)

187
4.17 Bus Timing
4.17.16 Single DRAM Interface
This section provides a single DRAM interface timing chart.
■ Single DRAM Interface Timing Chart
❍ Combination of single DRAM and basic bus cycle, CS switch-over
Figure 4.17-31 Example of Single DRAM Interface Timing Chart
[Explanation of operation]
• When a bus cycle starts from a high-speed page, RDX in a read cycle goes down to "L" from
the rising edge of Q4SR and is negated when the Q4SR cycle ends. In a write cycle, it goes
down to "L" from the rising edge of WE (including WEL and WEH) Q4SW and is negated
when the Q4SW cycle ends.
• CS4X and CS5X change at the same time as the output address. When a bus cycle starts
from a high-speed page, they change from the Q4SR and Q4SW cycles as with the column
address.
Q4SR BA1 BA2 Q1 Q2 Q3 Q4SW Q4SR Q4SR
CLK
A24-00 col. CS2X basic bus X row.adr. col. col. col.
D31-24
D23-16
CS2X
CS4X
CS5X
RDX
WR0X
CS4:RAS
CS4:CASL
CS4:CASH
CS4:WE
CS5:RAS
CS5:CASL
CS5:CASH
CS5:WE
CS5 Single CS2 usual CS4 Single CS5
Write
Read Write
Read Write
Write
Read
Read
Read
Read
Idle Idle