Yaskawa L1000E AC Drive CIMR-LEA User Manual
Page 225
C Standards Compliance
YASKAWA TOEPYAIL1E01A YASKAWA AC Drive L1000E Quick Start Guide
225
St
an
dar
d
s
Co
mplia
n
ce
C
Note: Use crimp insulated terminals or insulated tubing for wiring these connections. Wires should have a continuous maximum
allowable temperature of 75
°C 600 V UL approved vinyl sheathed insulation. Ambient temperature should not exceed 40°C.
Closed-Loop Crimp Terminal Recommendations
Yaskawa recommends using closed-loop crimp terminals on all drive models. UL approval requires the use of UL Listed
crimp terminals when wiring the drive main circuit terminals on models 2A0106 to 2A0432 and 4A0056 to 4A0260. Use
only crimping tools as specified by the crimp terminal manufacturer. Yaskawa recommends crimp terminals made by JST
and Tokyo DIP (or equivalent) for the insulation cap.
matches the wire gauges and terminal screw sizes with Yaskawa - recommended crimp terminals, tools, and
insulation caps. Refer to the appropriate Wire Gauge and Torque Specifications table for the wire gauge and screw size
for your drive model. Place orders with a Yaskawa representatives the Yaskawa sales department.
4A0140
R/L1, S/L2, T/L3
95
(3/0)
50 to 95
(1/0 to 4/0)
M10
18 to 23
(159 to 204)
U/T1, V/T2, W/T3
70
(2/0)
50 to 95
(1/0 to 4/0)
–, +1
–
50 to 95
(1/0 to 4/0)
+3
–
25 to 95
(3 to 4/0)
25
(4)
25
(4)
4A0188
R/L1, S/L2, T/L3
95
(4/0)
50 to 95
(1/0 to 4/0)
M10
18 to 23
(159 to 204)
U/T1, V/T2, W/T3
95
(4/0)
50 to 95
(1/0 to 4/0)
–, +1
–
35 to 95
(1 to 4/0)
+3
–
50 to 95
(1/0 to 4/0)
25
(4)
25 to 35
(4 to 2)
4A0225
R/L1, S/L2, T/L3
50
× 2P
(1
× 2P)
35 to 150
(2 to 300)
M10
18 to 23
(159 to 204)
U/T1, V/T2, W/T3
70
× 2P
(1/0
× 2P)
35 to 150
(2 to 300)
–, +1
–
50 to 150
(1 to 250)
+3
–
25 to 70
(3 to 3/0)
25
(4)
25 to 150
(4 to 300)
4A0260
R/L1, S/L2, T/L3
70
× 2P
(2/0
× 2P)
95 to 300
(1 to 600)
M10
18 to 23
(159 to 204)
U/T1, V/T2, W/T3
70
× 2P
(2/0
× 2P)
95 to 300
(1/0 to 600)
–, +1
–
70 to 300
(3/0 to 600)
+3
–
35 to 185
(1 to 325)
35
(2)
35 to 185
(2 to 350)
Drive Model
Terminal
Recommended
Wire Size
mm
2
(AWG, kcmil)
Wire Range
mm
2
(AWG, kcmil)
Screw
Size
Tightening Torque
N•m (lb.in.)