Yaskawa L1000E AC Drive CIMR-LE†A - Manual (Page 163)

B Parameter Table
YASKAWA TOEPYAIL1E01A YASKAWA AC Drive L1000E Quick Start Guide 163
Par
ame
te
r Ta
ble
B
B Parameter Table
◆ Understanding the Parameter Table
■ Control Modes, Symbols, and Terms
The table below lists terms and symbols used in this section to indicate which parameters are available in which control
modes.
Table 54 Symbols and Icons Used in the Parameter Table
Note: If a parameter is not available in a certain control mode, the symbol for that control mode is grayed out.
◆ Parameter Table
■ A: Initialization Parameters
The A parameter group creates the operating environment for the drive. This includes the parameter Access Level, Motor
Control Method, Password, User Parameters and more.
A1: Initialization Parameters
Symbol Description
Parameter is available in all control modes.
Parameter is available when operating the drive with V/f Control.
Parameter is available when operating the drive with Open Loop Vector.
Parameter is available when operating the drive with Closed Loop Vector.
Parameter is available when operating the drive with Closed Loop Vector for PM motors.
Parameter can be changed during run.
Motor 2 Refers to a second motor when the drive is operating two motors. Switch between these motors using the multi-function input terminals.
No.(Addr.) Name Description Setting
A1-00
(100H)
<1>
Language Selection
0: English
1: Japanese
2: German
3: French
4: Italian
5: Spanish
6: Portuguese
7: Chinese
8: Czech
9: Russian
10: Turkish
11: Polish
12: Greek
Default: 0
Min: 0
Max: 12
<2>
A1-01
(101H)
Access Level Selection
0: View and set A1-01 and A1-04. U - parameters can also be viewed.
1: User Parameters (access to a set of parameters selected by the user, A2-01 to
A2-32)
2: Advanced Access (access to view and set all parameters)
Default: 2
Min: 0
Max: 2
All Modes
V/f
OLV
CLV
CLV/PM
All Modes
common
_
All Modes
common
_