Yaskawa L1000E AC Drive CIMR-LE†A - Manual (Page 120)

4 Start-Up Programming
120 YASKAWA TOEPYAIL1E01A YASKAWA AC Drive L1000E Quick Start Guide
4. Connect the cable to the CN19 connector port on the drive.
Note: The connector port location and angle vary by drive model.
NOTICE: Be sure that the connector fastens at the correct angle to the CN19 connector port. The incorrect angle could damage the
battery, cable, or connector.
Figure 67
Figure 74 Connecting the Cable
5. The cable should pass through the connector cover with the cover fastened to the drive.
Figure 68
Figure 75 Reattaching the CN19 Connector Cover
6. Slide the CN19 connector cover back into place as shown in Figure 76 .
NOTICE: Make sure the cable does not get pinched between the drive and the CN19 connector cover, as this could damage the cable.
Figure 69
Figure 76 Sliding the CN19 Connector Cover into Place
Battery cable
Port CN19
Downward Leftward