Grass Valley NV9000-SE v.3.0 - Manual (Page 443)

NV9000-SE Utilities • User’s Guide 423
14. External Interfaces
Updating External Interface Information
Figure 14-16. External Interface Page for Serial Protocol
4 In the ‘External Interface Connection’ section, update information in the fields provided. Dif-
ferent fields display depending on the whether the connection is Ethernet or serial. For informa-
tion on changing the type of connection, see
Changing External Interface Connection Protocol
(Type) on page 423:
5 Click Save .
Or
To revert to the previously saved configuration, click
Revert to Saved
.
6 Click
X
on the window title tab to close the page.
Changing External Interface Connection Protocol (Type)
The protocol selected for an external interface determines the type of connection: Ethernet or serial.
The protocol associated with an external interface can be updated using the ‘Apps’ table accessed
through the ‘Views’ pane. For information on updating Ethernet or serial connection information,
see
Updating External Interface Connection Information on page 421.
Connection Type Field Description
(displays if Ethernet
protocol selected) IP Address Enter the IP address for the external interface communication
with the NV9000-SE system.
(displays if serial
protocol selected) Port From the drop-down list, select a port and then select settings
for that port as required.
Note: The serial port settings differ depending on which
protocol was selected in Step 3. The Miranda router standard is
38.4 K baud, 8 data bits, no parity, and 1 stop bit.
Baud Rate
Parity
Stop
Data