Grass Valley NV9000-SE v.3.0 - Manual (Page 175)

NV9000-SE Utilities • User’s Guide 155
8. Level Sets
Managing Signal Types and Signal Binding
How to Delete a Signal Type
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the Navigation area, select the ‘Views’ pane and then ‘Signal Types’. The ‘Signal Types’
table appears, as shown in Figure 8-32.
To narrow the list of signals that display, enter the first characters of a signal type in the ‘Name
Filer’ field. The list is automatically reduced to display only signal types matching that charac-
ter string.
3 Click anywhere in the row listing the signal type(s) being deleted and click
Delete
.
4 Click Save .
Or
To revert to the previously saved configuration, click
Revert to Saved
.
5 Click
X
on the window title tab to close the table.
How to Delete a Signal Type Binding to a Virtual Level
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the Navigation area, select the ‘Views’ pane and then ‘Signal Types’. The ‘Signal Types’
table appears, as shown in Figure 8-33.
To narrow the list of virtual levels that display, enter the first characters of a virtual level in the
‘Virtual Level Filter’ field. The list is automatically reduced to display only virtual levels
matching that character string.
Or
Enter the first characters of a signal type in the ‘Signal Type Filer’ field. The list is automati-
cally reduced to display only signal types matching that character string.
3 Click anywhere in the row listing the virtual level/signal binding(s) being deleted and click
Delete .
4 Click
Save
.
Or
To revert to the previously saved configuration, click
Revert to Saved
.
5 Click
X
on the window title tab to close the table.