Grass Valley NV9000-SE v.3.0 - Manual (Page 105)

NV9000-SE Utilities • User’s Guide 85
7. Routers
Updating Router Details
router can be updated. The protocol selected must match the protocol currently installed on the
router.
The router’s protocol can be changed using the ‘Router Controls’ table accessed through the
‘Views’ pane. You can only select from a list of existing protocols. For a list of available protocols,
see
Protocols on page 515.
How to Update Router Protocol Information
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the Navigation area, select the ‘Views’ pane and then ‘Router Controls’. The ‘Router
Controls’ table appears, as shown in Figure 7-19.
To narrow the list, enter the first characters of the router’s name in the ‘Router Filter’ field. The
list is automatically reduced to display only routers matching that character string.
Or
Enter the first characters of the control point’s description in the ‘Control Point Filter’ field.
The list is automatically reduced to display only routers associated with that control point.
Figure 7-19. Router Controls Table
3 On the row listing the router being updated, click in the ‘Protocol’ column to activate it and
select a new protocol from the drop-down list.
4 Click
Save
.
Or
To revert to previously saved configuration, click
Revert to Saved
.
The new protocol also displays in the ‘Router Info’ section on the ‘Router Details’ page (select
‘Routers’ from the ‘Configuration’ pane).
5 Click X on the window title tab to close the table.