Grass Valley NV9000-SE v.3.0 - Manual (Page 321)

NV9000-SE Utilities • User’s Guide 301
11. Control Panels
Adding a Control Panel
a Click on the line of text ‘Multi-Destination Display - Click here to switch to Salvo Display’,
as shown in as shown in Figure 11-28. The text is a toggle.
Figure 11-28. Salvo Display Switch
b Click a button in the control panel image to select a destination number. The ‘Salvo Display
Entry’ dialog box appears:
Figure 11-29. Salvo Display Entry Dialog Box
c Choose a salvo from the drop-down menu and click
OK
. The salvo number displays on the
selected line in the control panel window.
Or
Click
Delete Entry to delete the entry.
7 Click
Save
.
Or
To revert to the previously saved configuration, click
Revert to Saved
.
8 Click
X
on the window title tab to close the page.
NV9640
The ‘NV9640’ page determines how the NV9640 control panel functions and displays. For a full
description of the control panel and functions, see
NV9640 on page 535.
The ‘NV9640’ page is divided into sections:
• Button Layout — A graphic representation of the buttons and control panel window on the con-
trol panel. The button layout is organized as a “tree” with “parent” pages and “child” pages.
“Parent” pages are one level up from a “child” page; “child” pages are always one level below a
Click to activate Salvo mode
Tip Operators using the control panel may define a local salvo by placing the
control panel in “record” mode (using the menu), performing a sequence of
operations, and saving the salvo by giving it a name. The operator must
also add the new salvo to the salvo list so that it can be selected when the
operator places the control panel in salvo mode.