Guralp Systems CMG-DCM build <10,000 - Manual (Page 66)

CMG-EAM (Platinum Firmware)
software. They are automatically enabled if the digitiser is ever
configured via the interface in Platinum.
The Server address table allows a number of Internet or network-
accessible NTP servers to be listed for use as clock sources. You can
specify these servers by either IP address or hostname. If names are
used, they must either be listed in the local hosts file (/etc/hosts) or
resolvable via the Domain Name Service (DNS). Entries in this table
can be deleted by ticking the associated check-box and submitting the
form.
6.3.2 Configurable parameters in expert mode
The only difference between standard and expert mode on this screen
is the addition of a Server options column to the NTP servers table.
This text field can be used to provide additional control over how the
NTP daemon uses the server. The options are described in the
standard ntp.conf manual page, available on-line at
http://linux.die.net/man/5/ntp.conf .
6.4 Email configuration
Platinum firmware is capable of sending system alerts via email over
the Internet or over a local area network.
This feature is currently unused but is provided for future expansion.
To configure email from the web interface, select “Networking” from
the “Configuration” → “All options” menu and then click on the link
for “Mail Transfer Agent (e-mail service)” or select the “Mail” short-cut
from the “Networking” menu. To configure NTP from the command
line, start gconfig, select “Networking” from the top level menu and
then select “Mail Transfer Agent (e-mail service)”.
The following screen is displayed:
66 Issue C