Guralp Systems CMG-DCM build <10,000 - Manual (Page 182)

CMG-EAM (Platinum Firmware)
13.2.5 RAID Array Services
RAID arrays provide increased data security at the cost of extra storage
devices. They can prevent the loss of data in the event of a single drive
failure. The “RAID Array Services” item on the “Control” menu will
only be displayed on CMG-NAMs with RAID fitted. It displays a page
which reports the status of and allows simple control of the fitted
RAID array. The status of swap partitions are also reported on this
page.
13.3 Tools Menu
13.3.1 Passwords
The password-change facility is described in section 2.3 on page 24.
13.3.2 GCF Audit Log Viewer
Detailed information about every GCF packet sent or received are
stored on the GSL-EAM and can be viewed with the GCF Audit Log
Viewer. To access the GCF Audit Log Viewer from the web interface,
click on “GCF audit log viewer” on the “Tools” menu. To access the
same information from the command line, enter the command
gcflogview
The initial screen displays all GCF data sources and sinks in a table,
together with some summary information. In the example given, it can
be seen that Ports B and F are inactive, Port A was receiving GCF data
until 16:36 and the default instance of the Scream network server was
sending GCF data until the same time.
182 Issue C