Guralp Systems CMG-DCM build <10,000 - Manual (Page 144)

CMG-EAM (Platinum Firmware)
Set the port (port number or service name) that you want the server to
listen on in the Service Port text field.
The server identifies itself to clients with an organization name: this
should be entered into the Organization text-field. If left blank, the
value will default to “Guralp Systems Ltd”.
Additional configuration parameters are available in expert mode:
It may sometimes be desirable, for debugging purposes, to separate log
messages for this transmitter from the standard system log. The Log
file text field can be populated with a path name which will then be
used for dedicated logging. If left blank, logging occurs (via the
standard Linux syslog facility) to /var/log/messages.
The Log level drop-down menu controls the level of detail present in
log messages, whether to syslog or to a dedicated log file. Not all of the
standard syslog logging levels are available. The menu offers a choice
(in order of decreasing detail) of:
•
Debugging information;
•
Informational messages;
•
Important notices; or
•
Warnings
In the default configuration, all data for all servers is taken from a
single compressor, as described at the beginning of this section. For
more complex configurations, it is possible to configure multiple
compressors, each with their own multiplexor input and set of output
servers. In these situations, the Mini-SEED convertor drop-down
menu can be used to select a compressor instance with which to
associate this server. The menu offers a list of currently configured
compressors.
144 Issue C