Guralp Systems CMG-DCM build <10,000 - Manual (Page 183)

Operator's Guide
The “Size” column shows the size of the log buffer allocated to each
data source or sink. The log buffer size can be changed from the
relevant service or port configuration screens in expert mode.
For example, to allocate a larger log buffer to the GCF receiver running
on Port A, click on “Serial ports” from the main menu, then on “Port A
- GCF in”, “GCF input settings” and then click the “Expert” button.
You will see a drop-down selection list labelled “Audit log size” from
which you can select 64Kib, 256Kib, 2MiB or 16MiB.
To change the GCF audit log buffer size for the Scream network server,
select “Services” from the “Data transfer/recording” section of the
“Configuration” menu then click on “GCF Scream network server”.
Click on the entry for the instance you wish to change and then click
the “Expert” button at the bottom of the page. You will see a drop-
down selection list labelled “Audit log size” from which you can select
64Kib, 256Kib, 2MiB or 16MiB.
Each entry in the table has a “View” button, which shows detail from
the relevant log at block (packet) level). The view for Port A is shown
here:
November 2010 183