Guralp Systems CMG-DCM build <10,000 - Manual (Page 125)

Operator's Guide
For minicom users, the X-modem protocol should first be configured:
start minicom and type
+ (minicom's escape sequence) and
then to display the options menu:
Welcome to minicom 2.3
OPTIONS: I18n
Compiled on Sep 25 2009, 23:40:20.
Port /dev/ttyS0
Press CTRL-A Z for help on special keys
+-----[configuration]------+
eam2243 logi| Filenames and paths |
Password: | File transfer protocols |
eam2243 ~ # | Serial port setup |
| Modem and dialling |
| Screen and keyboard |
| Save setup as dfl |
| Save setup as.. |
| Exit |
+--------------------------+
Select “File transfer protocols” and ensure that the command used for
X-modem transfers is set to /usr/bin/sx ­vv
To download a file, mount the disk if required, enter the command
eam2010 ~ # sx path-to-file
and then immediately type + followed by to activate
minicom's receive file function. Select “xmodem” from the resulting
menu and then enter a name for the downloaded file. The transfer
should start immediately:
The disk is mounted at: /media/50AD-F5D8
A new bash session has been created.
When you exit from this bash session (which you can do with
`exit'+-----[xmodem download - Press CTRL-C to quit]------+
remain| |
you wi|rx: ready to receive 2009336T1030Z.gcf |
|Bytes received: 154112 BPS:5978 |
eam201| |
|Transfer complete |
| |
| READY: press any key to continue... |
+---------------------------------------------------+
November 2010 125