Guralp Systems CMG-DCM build <10,000 - Manual (Page 136)

CMG-EAM (Platinum Firmware)
The Output type drop-down menu offers a choice of:
•
“All blocks” - filtering by block type is disabled;
•
“Only status blocks” - no data blocks are transmitted;
•
“Only blocks below a certain sample rate” - the threshold
sample rate is specified in the following text field; and
•
“Only blocks matching a list of channel names” - offering the
highest granularity of control.
If the previous field is set to “Only blocks below a certain sample rate”,
the Max sample rate text field is used to specify the threshold, above
which data are not transmitted.
If the Output type field is set to “Only blocks matching a list of
channel names”, the channel names must be specified in the following
table:
136 Issue C