Guralp Systems CMG-DCM build <10,000 - Manual (Page 146)

CMG-EAM (Platinum Firmware)
If you want the server to pro-actively send data to remote GSMS
receivers, enter their IP addresses (or host names) in the Push host
column and port numbers (or service names) in the Service column of
the “Push hosts” table. For each, select TCP or UDP from the Protocol
drop-down menu - this must match the receiver's setting.
The GSMS server need not send all data from all channels to its
clients: it is possible to select which channels are transmitted. Select
one of the three different transmission modes:
•
Automatic: all channels are transmitted and named
automatically
•
Semi-automatic: all channels are transmitted and names can be
mapped using a configuration table
•
Manual: only channels named in the configuration table are
transmitted.
The relevant part of the screen (shown truncated) looks like this:
146 Issue C