Guralp Systems CMG-DCM build <10,000 - Manual (Page 158)

CMG-EAM (Platinum Firmware)
When you have entered all the required information, press Submit.
12.1.2 The GDI link receiver
To configure a GDI link receiver, connect to the CMG-EAM
configuration system via either the web interface (select “All options”)
or by using gconfig from the command line interface. From the main
screen select “services”, then “GDI link receiver”. The next screen
shows a list of all GDI link receiver instances that have been
configured on the CMG-EAM.
In most cases, you will only need a single instance and you can enable
and reconfigure the Default Instance for your requirements.
Clicking on the Default Instance link brings up the screen shown
overleaf.
You can enter a descriptive name for the instance: this is useful if you
are configuring multiple instances but, in most cases, this can be set to
the hostname of the CMG-EAM.
The Network Settings section allows you to set an optional “client
name” which will be visible from the GDI link server.
158 Issue C