Guralp Systems CMG-DCM build <10,000 - Manual (Page 212)

CMG-EAM (Platinum Firmware)
Gives you a scroll back buffer. You can scroll up with ,
down with , a page up with , a page down with and,
if you have them, the and keys can
also be used. You can search for text in the buffer with
(case-sensitive) or + (case-insensitive). will find
the next occurrence of the string. will enter citation mode.
A text cursor appears and you specify the start line by hitting
key. Then scroll back mode will finish and the contents
with prefix '>' will be sent.
Clears the screen.
Toggle local echo on and off.
A break signal is sent.
Toggle the type of escape sequence that the cursor keys send
between normal and applications mode. (See also the
comment about the status line below).
Jump to a shell. On return, the whole screen will be redrawn.
Clears the screen, runs kermit and redraws the screen upon
return.
Turn Capture file on off. If turned on, all output sent to the
screen will be captured in the file too.
Configure minicom. Puts you in the configuration menu.
Communication Parameters. Allows you to change the bps rate,
parity and number of bits.
Exit minicom without resetting the modem. If macros changed
and were not saved, you will have a chance to do so.
Receive files. Choose from various protocols (external). If you
have the filename selection window and the prompt for
download directory enabled, you'll get a selection window for
choosing the directory for downloading. Otherwise the
download directory defined in the Filenames and paths menu
will be used.
212 Issue C