Guralp Systems CMG-DCM build <10,000 - Manual (Page 130)

CMG-EAM (Platinum Firmware)
of them prevents connection attempts made to all other addresses. If
left blank, connection requests will be considered from all interfaces.
The Server port/service name field must be populated with the service
name or port number on which it will listen for incoming connections.
This must not be used by any other service on this system.
The next section of the form looks like this:
The ACK/NAK timeout text field should be populated with an integer
value which specifies the number of milliseconds the server should
wait for an acknowledgement packet before transmitting the next
block.
The Mode drop-down menu controls the BRP transmission mode of
the server. At present, the only available choice is “Direct - simple
transmission with link error correction but no backfill”. Future
implementations will offer additional options.
The “Output filtering” section allows the operator to control which
data are transmitted, selecting by block type, sample rate or channel
name.
The Output type drop-down menu offers a choice of:
•
“All blocks” - filtering by block type is disabled;
•
“Only status blocks” - no data blocks are transmitted;
130 Issue C