Guralp Systems CMG-DCM build <10,000 - Manual (Page 24)

CMG-EAM (Platinum Firmware)
firmware upgrade – or there is a network address conflict or, worse, a
security problem on your network.
You will now be prompted for a login name: the default is root. - type
this at the prompt and hit . You will next be prompted for a
password; the default password is rootme. Note that no characters
will be echoed to the screen as you type the password.
Once connected, you will be presented with a shell prompt which is
ready to accept commands. The shell prompt contains the CMG-
EAM's serial number.
When you are finished with your SSH session and want to disconnect,
type “exit” at the command line, or
+ .
2.3 Changing the password
Access to a Platinum system is password-protected. As shipped, the
user name is root and the password is rootme. The same password
is used for both login and web authorisation. In the majority of cases,
there is no need to alter the password from the default setting.
24 Issue C
Note: If you plan to use ssh regularly to communicate with a
CMG-EAM, you can configure the system to bypass the
password prompt from a list of pre-authorised computer/user
combinations. This involves generating a unique key-pair (for
the user and PC which will access the CMG-EAM) and then
copying the public half of the key-pair to the CMG-EAM. This is
implemented using the PuTTYgen and Pageant programs: see
section 6.5 on page 67 and the help facility within PuTTY for
more information.