Guralp Systems CMG-DCM build <10,000 - Manual (Page 139)

Operator's Guide
To configure a GDI Mini-SEED compressor from the web interface,
select “System services” from the “Configuration” → “All options”
menu or select the “Services” short-cut from the “Data
transfer/recording” menu. To configure a GDI Mini-SEED compressor
from the command line, start gconfig and select “System services”
from the top level menu.
Now select “gdi2miniseed -- Mini-SEED compressor” from the System
Services menu. The next screen shows a list of all Mini-SEED
compressor instances that have been configured:
Although the default instance is marked as “does not start
automatically”, it will be started if a dependant service is started.
You can reconfigure any existing compressor by clicking on its menu
entry. To configure a new Mini-SEED compressor instance, select
“Create new service instance”. The following screen allows you to
configure the parameters of the compressor. The first part of the
screen looks like this:
November 2010 139