Guralp Systems CMG-DCM build <10,000 - Manual (Page 150)

CMG-EAM (Platinum Firmware)
The CMG-EAM scans all incoming data and prepares a list, in the
correct format, of the names of instruments which are sending strong
motion results. Enter one of these names in the Instrument field.
The QSCD protocol only supports a single instrument. If you need to
transmit results from multiple instruments, you should configure
multiple QSCD sender instances, one for each instrument.
11.5.2 Configurable parameters in expert mode
The following additional configuration parameters are available by
clicking the “Expert” button at the bottom of the form.
It may sometimes be desirable, for debugging purposes, to separate log
messages for this transmitter from the standard system log. The Log
file text field can be populated with a path name which will then be
used for dedicated logging. If left blank, logging occurs (via the
standard Linux syslog facility) to /var/log/messages.
The Log level drop-down menu controls the level of detail present in
log messages, whether to syslog or to a dedicated log file. Not all of the
150 Issue C