Guralp Systems CMG-DCM build <10,000 User Manual
Page 112
CMG-EAM (Platinum Firmware)
(convertor) is started automatically. See section 11.3 on page 138 for
more details.
Mini-SEED recording is disabled by default. To enable it, clear the
Disable mini-SEED recording check-box.
By default, every three hours the current mini-SEED file is closed and
recording recommences to a new file. This interval can be changed
using the File period drop-down menu. The options are 15 or 30
minutes and 1, 2, 3, 4, 6 or 12 hours.
10.2.2 Configurable parameters in expert mode
The first set of extra options, shown above, apply to all recording.
The rdisk daemon controls the disk's power and heater and is
designed to simplify the process of mounting and dismounting the
removable disk pack. Its user interface is described in detail in section
10.3.1.2 on page 120. Where there are no removable drives (as, for
example, in a typical CMG_NAM configuration), the use of rdisk is
unnecessary. It may be turned of by clearing the Use rdisk check-box.
112
Issue C