Guralp Systems CMG-DCM build <10,000 - Manual (Page 160)

CMG-EAM (Platinum Firmware)
For each server, you should set:
•
the peer name: this should match the server name configured
on the
•
the remote host: this is the DNS name or IP address of the
GDI link server
•
the remote service/port: the default is 1565 but, if you have
configured a different port on the GDI link server, you should
enter the same port here.
•
enable at start-up
•
filtering: you can filter by sample rate or channel names
160 Issue C