Guralp Systems CMG-DCM build <10,000 - Manual (Page 143)

Operator's Guide
You can reconfigure any existing service by clicking on its menu entry.
To configure a new SEEDlink server, select “Create service instance”.
The following screen allows you to configure the parameters of the
server.
The name of the server should be set to a meaningful name for the data
that it will serve by populating the User description text field.
The server can be enabled or disabled at boot-up using the Enable
check-box or deleted entirely by selecting the Delete check-box.
To configure the server to listen for incoming data requests only on a
specific IP address, set this (or the associated host name) in the Bind
host text field. By default it will listen on all configured interfaces.
November 2010 143