Guralp Systems CMG-DCM build <10,000 - Manual (Page 60)

CMG-EAM (Platinum Firmware)
•
Broadcast: Enter the broadcast address to be associated with
this address on the interface.
•
ip addr arguments: This field can be used to tune the
operation of the network interface. For settings that can be
used here, please see http://linux.die.net/man/8/ip .
•
Delete: For populated table rows, a check-box appears in this
column. To delete the associated alias, tick the check-box
and submit the form.
The second table, Extra routes, is used to add extra network and host
routes to allow access to networks other than those connected via the
default router specified earlier, or to force packets to traverse a
particular route despite the default router setting. By default, the table
displays three blank rows but, should you need more, complete the
first three and submit the form: it will be redrawn with extra blank
rows. The columns in the table are:
•
Type: This drop-down menu offers the following choices:
◦
unicast - This is the normal setting for a host or network
route. The route entry describes real paths to the
destinations specified in the Destination column.
60 Issue C