Guralp Systems CMG-DCM build <10,000 - Manual (Page 151)

Operator's Guide
standard syslog logging levels are available. The menu offers a choice
(in order of decreasing detail) of:
•
Debugging information;
•
Informational messages;
•
Important notices; or
•
Warnings
In most configurations, all data for all transmitters is taken from a
single multiplexor, as described in section 1.3 on page 10. For more
complex configurations, it is possible to configure multiple
multiplexers, each with their own set of input and output services. In
these situations, the GDI multiplexer drop-down menu can be used to
select a multiplexer instance with which to associate this transmitter.
The menu offers a list of currently configured multiplexers.
11.6 WIN Sender
WIN is a Japanese seismic data format.
To set up a WIN server on the CMG-EAM using the web interface,
select “System services” from the “Configuration” → “All options”
menu or select the “Services” short-cut from the “Data
transfer/recording” menu. To configure a WIN server from the
command line, start gconfig and select “System services” from the
top level menu.
Now select “win-out -- WIN sender ” from the System Services menu.
The next screen shows a list of all WIN server instances that have been
configured:
You can reconfigure any existing service by clicking on its menu entry.
To configure a new WIN sender, select “Create service instance”. The
following screen allows you to configure the parameters of the sender.
It is shown here in parts.
November 2010 151