Guralp Systems CMG-DCM build <10,000 - Manual (Page 154)

CMG-EAM (Platinum Firmware)
11.6.2 Configurable parameters in expert mode
The following additional configuration parameters are available by
clicking the “Expert” button at the bottom of the form.
It may sometimes be desirable, for debugging purposes, to separate log
messages for this transmitter from the standard system log. The Log
file text field can be populated with a path name which will then be
used for dedicated logging. If left blank, logging occurs (via the
standard Linux syslog facility) to /var/log/messages.
The Log level drop-down menu controls the level of detail present in
log messages, whether to syslog or to a dedicated log file. Not all of the
standard syslog logging levels are available. The menu offers a choice
(in order of decreasing detail) of:
•
Debugging information;
•
Informational messages;
•
Important notices; or
•
Warnings
In most configurations, all data for all transmitters is taken from a
single multiplexor, as described in section 1.3 on page 10. For more
complex configurations, it is possible to configure multiple
multiplexers, each with their own set of input and output services. In
these situations, the GDI multiplexer drop-down menu can be used to
select a multiplexer instance with which to associate this transmitter.
The menu offers a list of currently configured multiplexers.
154 Issue C