Guralp Systems CMG-DCM build <10,000 - Manual (Page 132)

CMG-EAM (Platinum Firmware)
The Log level drop-down menu controls the level of detail present in
log messages, whether to syslog or to a dedicated log file. Not all of the
standard syslog logging levels are available. The menu offers a choice
(in order of decreasing detail) of:
•
Debugging information;
•
Informational messages;
•
Important notices; or
•
Warnin gs
The GCF BRP sender keeps its own audit log, independent from the
system log. The contents of this log are available using the “GCF Audit
Log viewer” facility as described in section 13.3.2 on page 182. The
amount of data retained is controlled by the Audit log size drop-down
menu, whose choices are:
•
64Kib (small);
•
256Kib (medium);
•
2MiB (large); and
•
16MiB (huge).
It is possible to copy all incoming data, verbatim, to a network port,
which can be specified in the Debug port text field. This is an
advanced debugging technique which is beyond the scope of this
manual.
In most configurations, all data for all transmitters is taken from a
single multiplexor, as described in section 1.3 on page 10. For more
complex configurations, it is possible to configure multiple
multiplexers, each with their own set of input and output services. In
these situations, the GDI multiplexer drop-down menu can be used to
132 Issue C