Comtech EF Data CDM-760 - Manual (Page 91)

Front Panel Operation Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
6–5
6.2 CDM-760 Front Panel Menus
The primary and nested menus available from the CDM-760 front panel are described in this
section.
The actual choices displayed in the submenus depend on which FAST options are
enabled. Where a FAST option affects a menu, this is explained in the sections that
follow in this chapter.
Table 6-2. CDM-760 Front Panel Menus
Menu Branch Display Description
Opening Screen Comtech CDM-760 Advanced High-Speed
Trunking Modem ver X.X.X
Press ENTER to access the SELECT: (main) menu
or, from any other screen, press CLEAR repeatedly
to return to this screen. This top-level (splash)
screen identifies the modem and its running
firmware version.
Select (main)
SELECT: Configuration Monitor Test
Store/Ld Utility ODU FAST
Use to access all monitor and control submenus.
Configuration
CONFIG: NetSpec Tx Rx Intf CnC Comp
Remote IP Mask Ref MEO
Select to fully configure the modem.
Monitor
Monitor: Live-Alarms Stored-Events ACM
Rx-Params CnC Stats Buffer MEO
Use to monitor the status of the modem and view
the log of stored events for the modem.
Test
TEST: Mode BERT Comp Use to configure the modem into one of several test
modes or to configure/monitor the BER Tester.
Store/Ld
Configuration #0 thru #9: Load Store Use to store and load (recall) up to 10 different
modem configurations.
Utility
Utilities: Set-RTC Display EventLog
CID LED 1:1 1:N Circuit-ID Firmware
Use to perform miscellaneous functions, such as
setting the Real-Time Clock, adjusting the display
brightness, etc.
ODU
ODU: BUC PwrSupply+Ref
LNB PwrSupply+Ref FSK-control
When installed and available, use to configure
Outdoor Unit (BUC – Block Up Converter or LNB –
Low-Noise Block Down Converter) operations.
FAST FAST: Options Demo-Mode CnC
Use to verify installed options and configure
different Fully Accessible System Topology
options, e.g., extended data rates, interfaces, etc.
Contact Comtech EF Data Product Support for
details.