Comtech EF Data CDM-760 User Manual
Page 159
7–1
Chapter 7. ETHERNET-BASED
REMOTE PRODUCT
MANAGEMENT
7.1 Introduction
Ethernet-based Remote Product Management is available through the CDM-760 rear panel J4 |
MGMT RJ-45 10/100 BaseT Fast Ethernet M&C port or, when the optional High-Speed Packet
Processor is installed and enabled, the P0 | MGMT port.
To proceed with Ethernet-based Remote Product Management (SNMP OR WEB
SERVER), assumptions are made that:
•
The CDM-760 is operating with the latest version firmware files.
•
The CDM-760 is connected to a user-supplied, Windows-based PC, and:
o
The PC serial port is connected to the CDM-760 rear panel J3 | REMOTE port
with a user-supplied serial cable.
o
The PC Ethernet port is connected to either the CDM-760 rear panel J4 |
MGMT 10/100 BaseT Ethernet port or the Packet Processor P0 | MGMT port
with a user-supplied hub, switch, or direct Ethernet cable connection.
o
The PC is running a terminal emulation program (for operation of the
CDM-760 Serial Interface) and a compatible web browser (for operation of
the HTTP (Web Server) Interface).
•
The CDM-760 Management IP Address has been noted using the CDM-760 Serial
Interface.