Comtech EF Data CDM-760 - Manual (Page 82)

FAST Activation Procedure Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
5–2
5.2 About FAST Options
The FAST options are linked to three option registers:
• Register 1 is for Data Rate, ACM, and CnC options;
• Register 2 is for Modulation and Demodulation types, Optical Interface, and AUPC options.
• Register 3 is for the K4 GZip lossless compression and decompression, and Net Spec (DVB-S2
or DVB-S2-EB1 Network Specification) options.
Note the following:
• When a FAST Access Code is obtained from Comtech EF Data, it will be for a specific
register.
• The CnC and K4 GZip FAST options require installation of the respective option card into the
internal modem board.
5.3 FAST Activation Procedure
5.3.1 Fast Activation Using the CDM-760 Front Panel
See Chapter 6. FRONT PANEL OPERATION for complete information about using
this product management interface.
Do these steps:
1. Before contacting Comtech EF Data Product Support to order FAST feature upgrades, obtain
and record the modem’s baseboard serial number:
a) Use the front panel◄►arrows keys to navigate to the SELECT: FAST menu, and then
press ENTER.
b) The modem’s 9-digit “Baseboard S/N” is displayed on the left hand side of the bottom
line, as shown in this example:
FAST: Options Demo-Mode CnC (
◄ ►)
Baseboard S/N 012345678 Hw Rev##.##
c) Record the Serial Number: ______________________________________
2. To view currently installed FAST features, do these steps from the top-level SELECT: FAST
menu: