Comtech EF Data CDM-760 - Manual (Page 173)

Ethernet-based Remote Product Management Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
7–15
• Enter an IP Gateway destination address. If a response destination IP address is outside of
the CMD-760 M&C subnet, then the CDM-760 forwards M&C responses to this address.
• Enter an IP Address/Range ( IP address and subnet mask) for the CDM-760 M&C card.
System Account Access Information
At the time of publication, the "SMTP Server", "SMTP Domain Name", and "SMTP
Destination" text fields are non-functional.
• Enter a Read-only, Read/Write, or Admin Name and Password. A name or password can be
any alphanumeric combination with a maximum length of 10 characters. The factory default
names/passwords are as follows:
o
Read-only monitor/1234
o
Read/Write opcenter/1234
o
Admin comtech/comtech
Host Access List
The Host Access List allows you to define a list of remote client PCs which can connect to the
CDM-760 via HTTP and SNMP.
• Enter an IP (#) / Mask (IP address and a subnet mask) for each Access List entry.
For example, if you want to grant access to a remote client PC with an IP Address of
10.10.10.1, and any PC on a subnet of 192.168.10.xxx, then you would define the Access List
as:
IP 1 / Mask: 10.10.10.1/32
IP 2 / Mask: 192.168.10.0/24
Make sure ‘IP 3 / Mask’ and ‘IP 4 / Mask’ are not 0.0.0.0/0. An entry with
0.0.0.0/0 allows access to any PC.
• Use the Access List drop-down list to select Enable or Disable. When disabled, any client PC
may connect via HTTP and SNMP.
Click [Submit Admin] to save.