Comtech EF Data CDM-760 - Manual (Page 259)

Serial-based Remote Product Management Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
8–25
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
SNMP
Write
Community
SWC = 1 to 20 bytes,
characters,
no spaces
Command or Query.
Sets or returns SNMP write community string.
NOTE: Empty string is not allowed.
EXAMPLE: <0/SWC=private
SWC=
SWC!
SWC? SWC=x
(see description of
arguments)
SNMP
Trap
Community
STC = 1 to 20 bytes,
characters,
no spaces
Command or Query.
Sets or returns SNMP traps community string.
NOTE: Empty string is not allowed
EXAMPLE: <0/STC=Comtech
STC=
STC!
STC? STC=x
(see description of
arguments)
SNMP Trap
Destination
IP
Address 1
STA = 15 bytes Command or Query.
Sets or returns the IP address of the first SNMP Trap destination IP Address 1 where traps will be sent, in
the form xxx.xxx.xxx.xxx.
EXAMPLE: <0/STA=010.006.030.001 (if not configured, returns 000.000.000.000)
STA=
STA!
STA? STA=xxx.xxx.xxx.xx
x
(see description of
arguments)
SNMP Trap
Destination
IP
Address 2
STB = 15 bytes Command or Query.
Sets or returns the IP address of the SNMP Trap destination IP Address 2 where traps will be sent, in the
form xxx.xxx.xxx.xxx.
EXAMPLE: <0/STB=010.006.030.001 (if not configured, returns 000.000.000.000)
STB=
STB!
STB? STB=xxx.xxx.xxx.xx
x
(see description of
arguments)
SNMP
System
Contact
SSC = 0 to 255
bytes,
characters,
Command or Query.
Sets or returns SNMP System Contact string.
EXAMPLE: <0/SSC=Joe Net Admin (if not configured, returns empty string: <0/SSC = )
SSC=
SSC!
SSC? SSC=x (see
description of
arguments)
SNMP
Unit Name
SSN = 16 bytes,
characters,
Command or Query.
Sets or returns SNMP System Name string.
EXAMPLE: <0/SSN=Remote1 (if not configured, returns empty string: <0/SSC = )
SSN=
SSN!
SSN? SSN=x (see
description of
arguments)
SNMP
System
Location
SSL = 0 to 255
bytes
Command or Query.
Sets or returns SNMP System Location string.
EXAMPLE: <1/SSL=Upstairs back right (if not configured, returns empty string: <0/SSL = )
SSL=
SSL!
SSL? SSL=x
(see description of
arguments)
SNMP
Trap Version
STV = 1 byte, value
of 1 or 2
Command or Query.
Sets or returns SNMP Trap Version that will be used to send traps in the form x, where:
1 = SNMP Trap Version 1
2 = SNMP Trap Version 2
EXAMPLE: <0/STV=1
STV=
STV!
STV? STV=x
(see description of
arguments)
DoubleTalk ®
Carrier-in-
Carrier ®
(CnC) Mode
CNM = 1 byte, value
of 0 or 1
Command or Query.
Enables or Disables CnC in the form x, where:
0 = Off
1 = On
NOTES:
1) CnC may be enabled only if the optional plug-in hardware CnC card has been installed AND a CnC
FAST option is unlocked.
2) The range of permitted data rates is controlled by a FAST feature code. (Read EID to decode the
installed options for the modem.)
CNM=
CNM?
CNM*
CNM#
CNM? CNM=x
(see Description of
Arguments)
CnC
Min/Max
Search Delay
CSD = 6 bytes Command or Query.
(CnC parameter) Sets or returns CnC min/max delay value, in ms, in the form xxxyyy where:
xxx = minimum delay
yyy = maximum delay
NOTE: Maximum allowable value is 300ms.
EXAMPLE: <0/CSD=010300 (sets delay range from 10 ms min to 300 ms max value)
CSD=
CSD?
CSD*
CSD#
CSD? CSD=xxxyyy
(see Description of
Arguments)