Comtech EF Data CDM-760 - Manual (Page 143)

Front Panel Operation Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
6–57
6.2.3.8 (Monitor:) MEO (Medium Earth Orbit)
This menu is not available when in Normal (Geostationary) operation (Sect. 6.2.2.1.2
(CONFIG: NetSpec) Operating Mode).
AntId:0 AntStat:0 SatId:None Mute:0
Handover:00
This read-only screen indicates the MEO operating state. All status elements are generated by
the ACU (Antenna Controller Unit) as follows:
Parameter Description
AntId (Antenna ID) This is the identification number of the antenna that the modem it is linked with.
AntStat (Antenna Status) This is the status of the antenna that the modem is linked with.
SatId (Satellite ID) This is the identification number of the satellite the modem is linked with.
Mute This is the status of the BUC (Block Up Converter) that the modem is linked to.
Handover This is the number of seconds remaining in the antenna handover window.
Press ENTER or CLEAR to return to the previous menu.