Comtech EF Data CDM-760 - Manual (Page 257)

Serial-based Remote Product Management Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
8–23
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Clear All
Stored
Events
CAE = None Command only.
Forces the software to clear the events log.
THIS COMMAND TAKES NO ARGUMENTS.
CAE=
CAE?
CAE*
CAE#
N/A N/A
Initialize the
Stored
Events
Pointer
IEP = None Command only.
Resets internal pointer to allow RNE? queries to start at the beginning of the stored events log.
THIS COMMAND TAKES NO ARGUMENTS.
IEP=
IEP?
IEP#
N/A N/A
Event Log
Style
ELS = 1 byte, value
of 0 or 1
Command or Query
Sets or returns the EventLog Style in the form x, where:
0 = Fill and Stop (DEFAULT)
1 = Fill and Roll-over
EXAMPLE: <0/ELS=0 (sets EventLog to Fill and Stop)
ELS=
ELS?
ELS*
ELS#
ELS? ELS=x
(See Description of
Arguments)
Management
IP Address
IPA = 18 bytes Command or Query.
Sets or returns the IP Address and network prefix for the 10/100 Base-T Ethernet management port, in the
form aaa.bbb.ccc.ddd.yy, where:
aaa = 000-223
bbb = 000-255
ccc = 000-255
ddd = 000-255
yy = network prefix (value from 8 to 31)
EXAMPLE: <0/IPA=010.006.030.001.24
IPA=
IPA?
IPA*
IPA#
IPA? IPA=xxx.xxx.xxx.xxx
.yy
(see Description of
Arguments)
Management
Default
IP Gateway
IPG = 15 bytes Command or Query.
Sets or returns the IP Gateway Address for the Ethernet management port in the form aaa.bbb.ccc.ddd
where:
aaa = 000-223
bbb = 000-255
ccc = 000-255
ddd = 001-255
EXAMPLE: <0/IPG=010.006.030.001
IPG=
IPG?
IPG*
IPG#
IPG? IPG=xxx.xxx.xxx.xxx
(see Description of
Arguments)
Management
MAC
Address
N/A 12 bytes,
hexadecimal
Query only.
Returns the unique MAC Address for the modem in the form aabbccddeeff.
EXAMPLE: <0/MAC?
<0000/MAC=0006B00001C2
N/A MAC? MAC=aabbccddeeff
(see Description of
Arguments)
GE1 Link
Configuration
LC1 = 1 byte, value
of 0 thru 6
Command or Query.
Sets or returns the GE1 Interface mode in the form x, where:
0 = Auto Negotiate (default)
1 = 1000Mbps Full Duplex
2 = 100Mbps Full Duplex
3 = 100Mbps Half Duplex
4 = 10Mbps Full Duplex
5 = 10Mbps Half Duplex
6 = Off
LC1=
LC1?
LC1*
LC1#
LC1? LC1=x
(see Description of
Arguments)