Comtech EF Data CDM-760 - Manual (Page 70)

Updating Firmware Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
4–4
(Left) Optional CDM-760 48V DC Unit
(Right) Standard CDM-760 115V/230V AC Unit
• Read your terminal emulator program HELP feature or user guide for
operating and configuration instructions.
• See Chapter 8. SERIAL-BASED REMOTE PRODUCT MANAGEMENT for
information and instructions on using this operational interface.
d) On the CDM-760 – Turn on the power.
e) Use any of the following methods to obtain the CDM-760 Ethernet Management IP
Address and firmware information:
• Use the CDM-760 Front Panel menus:
o
Ethernet Management IP Address – Use the SELECT: Configuration → IP →
Addresses screen, as shown in this example:
IP:192.168.001.011/24 MAC:0006B00286F5
Gateway:192.001.001.100
()
o
Firmware Information – Use the SELECT: Utility  Firmware  Info 
Image#1 or Image#2 screens, as shown in this example:
Image #1 Bulk 12/19/13
FW-0020627A 1.2.1 (
)
• Use the CDM-760 Serial Remote Control Interface (via the User PC / terminal
emulator program):
o
Ethernet Management IP Address – Use the <0/IPA? query.
o
Firmware Information – Execute one of the following queries:
 Condensed – <0/SWR? (displays firmware versions)
 Detailed – <0/FRW?1 (for Image 1) or <0/FRW?2 (for Image 2) (displays
complete firmware load information)
• Use the HTTP Interface (via the User PC Web Browser; accessible once the CDM-760
Ethernet Management IP Address is known):