Comtech EF Data CDM-760 - Manual (Page 161)

Ethernet-based Remote Product Management Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
7–3
7.2.1 Management Information Base (MIB) Files
MIB files are used for SNMP remote management of a unique device. A MIB file consists of a
tree of nodes called Object Identifiers (OIDs). Each OID provides remote management of a
particular function. You should compile these MIB files in a user-supplied MIB Browser or SNMP
Network Monitoring System server. The following MIB files are associated with the CDM-760:
MIB File/Name
(where ‘x’ is revision letter)
Description
FW10874-2x.mib
ComtechEFData Root MIB file
ComtechEFData MIB file gives the root tree for ALL Comtech EF Data
products and consists of only the following OID:
Name: comtechEFData
Type: MODULE-IDENTITY
OID: 1.3.6.1.4.1.6247
Full
path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtechEFDa
ta(6247)
Module: ComtechEFData
FW-0020630x.mib
CDM-760 MIB file
MIB file consists of all of the OIDs for management of the modem functions
FW-0020631x .mib
CDM-760 Traps MIB file
Trap MIB file is provided for SNMPv1 traps common for modem.
7.2.2 SNMP Community Strings
In SNMP v1/v2c, the SNMP Community String is sent unencrypted in the SNMP
packets. The network administrator must make sure that SNMP packets travel only
over a secure and private network, if security is important.
The CDM-760 uses Community Strings as a password scheme used to authenticate users and
determine access privileges to the SNMP Agent MIBs. Type the SNMP Community String into the
user-supplied MIB Browser or Network Node Management software.
Three Community Strings are defined for SNMP access:
• Read Community default = public
• Write Community default = private
• Traps Community default = comtech
For correct SNMP operation, make sure to use the CDM-760 MIB files that are
applicable to the version of the CDM-760 modem M&C.
Read the CDM-760 FW Release Notes for information on the required firmware and
software compatibility.