Comtech EF Data CDM-760 - Manual (Page 83)

FAST Activation Procedure Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
5–3
a) Use the ◄►arrows keys to select OPTIONS, and then press ENTER:
FAST 1: Set View 2: Set View
OPTIONS 3: Set View (
◄ ►▲▼)
b) Use the ◄►arrows keys to select View for the desired register #, and then press
ENTER.
c) Use the ▲▼arrow keys to scroll through the list of available FAST options. Options are
identified as ‘Installed’ or ‘Not Installed’. Any option listed as ‘Not Installed’ may be
purchased as a FAST upgrade.
3. Contact Comtech EF Data Product Support to order features:
• Provide the modem’s 9-digit Baseboard Serial Number to the representative.
• Identify and purchase the desired FAST option(s).
• Obtain the invoice, the register-specific 20-digit FAST Access Code(s), and the FAST
option activation instructions.
When you purchase a FAST Access Code from Comtech EF Data, it will be for a
specific option register . The FAST options are linked to the three option
registers explained in Sect. 5.2.
4. Enter the FAST Access Code(s):
a) Press CLEAR to return to the SELECT: FAST  Options  (Register #) Set menu.
b) Use the arrow keys (◄ ►▲▼) to carefully enter your register-specific 20-character
FAST Access Code.
FAST: Set register1: Enter code below
00000000000000000000 then [ENTER] (
◄ ►▲▼)
c) Press ENTER to execute the FAST upgrade.
The modem responds with “Configured Successfully” if the FAST upgrade is accepted;
the modem then resets to its newly-incorporated default configuration.
However, if an invalid code is entered, the following message displays:
Failure to configure. Re-enter code.
88888888888888888888 then [ENTER] (
◄ ►▲▼)
Repeat the FAST Access Code entry procedure. Should the code entry error persist,
contact Comtech EF Data Product Support for further assistance.