Comtech EF Data CDM-760 - Manual (Page 109)

Front Panel Operation Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
6–23
ModCods and coding are valid for the listed network specifications as follows:
Network Spec QPSK 8PSK 16QAM 32QAM
DVB-S2
1/2, 3/5, 3/4, 4/5, 5/6,
8/9, 9/10
3/5, 2/3, 3/4, 5/6, 8/9,
9/10
2/3, 3/4, 4/5, 5/6, 8/9,
9/10
3/4, 4/5, 5/6, 8/9,
9/10
DVB-S2-EB1
1/2, 8/15, 17/30, 3/5,
19/30, 2/3, 127/180,
3/4, 4/5, 5/6, 31/36,
8/9, 9/10
17/30, 3/5, 19/30,
2/3, 127/180, 3/4,
4/5, 5/6, 31/36, 8/9,
9/10
19/30, 2/3, 127/180,
3/4, 4/5, 5/6, 31/36,
8/9, 9/10
127/180, 3/4, 4/5,
5/6, 31/36, 8/9, 9/10
Framing modes are as follows:
Displayed Setting FECFRAME Bits Enabled
Normal 64,800 (standard)
Short (Short Block) 16,200
Pilots are either On or Off.
6.2.2.3.2 (CONFIG: Rx) Data
Rx Data Rate Rx Symbol Rate
()
Use the   arrow keys to select a parameter. Press ENTER.
(CONFIG: Rx) Data  Rx Data Rate
The Data rate displays "00000.000kbps" when the demodulator is unlocked.
Rx Data Rate = 155520.001 kbps
The Rx Data Rate here is read-only. It shows the total aggregate data rate of the locked
demodulator.
The Data rate displays “00000.000kbps” when the demodulator is unlocked.
(CONFIG: Rx) Data  Rx Symbol Rate
Rx Sym Rate = 060140.976 ksps
()
Set the Rx Symbol Rate to match the Tx Symbol Rate of the distant end modulator. Use the  
arrow keys to select a digit, and then use the  arrow keys to change that digit. Press ENTER.