Comtech EF Data CDM-760 - Manual (Page 408)

Appendix K Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
K–8
Step 2 – The leftover 26000 kbps is available for the Priority 2 queue. Remember that the
Priority 2 queue only requires 2000 kbps. The Priority 2 queues therefore take only 2000 kbps,
and the remaining bandwidth is left for lower-priority queues.
Step 3 – The leftover 24000 kbps is available for Priority 4 queues (this example specifies no
Priority 3 queues). The Ingress DR in the Priority 4 queues is 28000 kbps. Because the available
bandwidth is only 24000 kbps, the bandwidth is therefore shared as per the configured weights.
The total weights are (2+4) = 6.
Step 4 – Calculate each bandwidth share, based on the total weights (6) and bandwidth
availability (24 000 kbps):
• Q3 = 24000 * (2/6) = 8000 kbps
• Q4 = 24000 * (4/6) = 16000 kbps