Comtech EF Data CDM-760 - Manual (Page 139)

Front Panel Operation Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
6–53
Port Selection (top line) Statistic
(bottom line)
Description
GigE1 GigE2 WAN M&C Opt
X X X Bytes to LAN Number of Bytes sent to LAN from selected Port
X Bytes to WAN
Total number of Bytes sent to WAN from GigE 1, GigE 2,
M&C, and Opt. This is post compression (if enabled) and
includes encapsulation and compression overhead.
X Packets from WAN Total number of Ethernet Packets received on WAN
destined for GigE 1, GigE 2, M&C, and Opt
X Bytes from WAN
Total number of Bytes received on WAN destined for
GBEI1, GBEI2, Optical, and M&C. This is prior to
decompression (if enabled) and includes encapsulation
and compression overhead.
X Packets to WAN Total number of Ethernet Packets sent to WAN from
GBEI1, GBEI2, Optical, and M&C
X Packets to M&C
Total number of Ethernet Packets sent to M&C from WAN
and from GBEI1, GBEI2, and Optical (does not count
packets from the J4 | MGMT port)
X Packets from M&C
Total number of Ethernet Packets sent from M&C to WAN
and to GBEI1, GBEI2, and Optical (does not count packets
to the J4 | MGMT port)
Typical for each parameter, the tally of Bytes or Packets sent/received is displayed in scientific
notation in two columns:
Column Description
Total The total number of Bytes or Packets sent/received since the statistics log was last cleared.
Last10S The total number of Bytes or Packets sent/received in the last 10 seconds.
You may use the   arrow keys on the bottom line to select the value displayed in the Total or
Last10S column, and press ENTER to view that item’s nested screen. Press ENTER or CLEAR to
return to the previous menu.
(Monitor: Stats) IP  Clr (Clear Statistics Buffer)
Use the  arrow keys to select Y (Yes) to clear the IP statistics buffer. The default is N (No).
Press ENTER to clear the buffer, or press CLEAR to back out of the command and return to the
previous menu.
6.2.3.6.2 (Monitor: Stats) BasebandFraming
Baseband Framing: ()
Tx Count (QPSK 3/5) 0.0E+00 Clr:N
On the bottom line: Use the   arrow keys to select between the operational statistics or the
Clr option.