Comtech EF Data CDM-760 - Manual (Page 172)

Ethernet-based Remote Product Management Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
7–14
7.4.4.2 Admin (Administration) Pages
The Administrator must use these pages to set up user access, manage the modem’s firmware,
and activate FAST options.
The Admin pages are available only when you log in with the Administrator User
Name and Password.
Click the Admin navigation tab, and then select the Access, SNMP, FAST, or Upgrade tab to
continue.
7.4.4.2.1 Admin | Access
The Administrator must use this page to manage the HTTP Interface user access settings.
Figure 7-4. Admin | Access Page
Modem IP Maintenance
• Use the Ping Reply drop-down list to select Enabled or Disabled:
o
Selecting Enabled causes the CDM-760 to reply to ping requests.
o
Selecting Disabled causes the CDM-760 to ignore ping requests and no replies are sent
to ping requests.
• The MAC address for the M&C card on the CDM-760 is read-only.
• Enter a Session Timeout number, in seconds. This is the time allotted an inactive user session
on the HTTP Interface. Any activity (configuration changes, mode settings, etc.) resets and
restarts the Session Timeout countdown clock.