Comtech EF Data CDM-760 - Manual (Page 35)

Introduction Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
1–9
Field activation of software-based options is possible through Comtech’s FAST (Fully Accessible
System Topology) Feature upgrade process.
Table 1-1 shows the FAST and FAST-accessible hardware options available for the CDM-760.
Table 1-1. FAST and FAST-accessible Hardware Options
Description and Comments Option Installation Method
ACM (Advanced Coding and Modulation) Point-to-Point
FAST
AUPC (Automatic Uplink Power Control)
150 Msps Rx symbol rate
150 Msps Tx symbol rate
Rx QPSK Demodulation
Rx 8-PSK Demodulation
Rx 16APSK Demodulation
Rx 32APSK and 64APSK Demodulation
Tx QPSK Modulation
Tx 8-PSK Modulation
Tx 16APSK Modulation
Tx 32APSK and 64APSK Modulation
DVB-S2 Efficiency Boost version X (DVB-S2-EBx)
Carrier-in-Carrier (CnC)
FAST & Hardware K4 GZip Lossless Compression
Optical Gigabit Ethernet Interface
G.703 Data Interface E3/T3/STS-1 (34.368/ 44.768/51.84 Mbps)
Hardware
STM-1 Copper Data Interface (155.52 Mbps)
OC-3 Single Mode Data Interface (155.52 Mbps)
OC-3 Multi Mode Data Interface (155.52 Mbps)
High-Speed Packet Processor
1.2.7 Monitor and Control Interfaces
• Chapter 6. FRONT PANEL OPERATION
• Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
• Chapter 8. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
The unit is managed through multiple interfaces providing options for both in-band (over
satellite) and out-of-band monitor and control.