Dell PowerVault ML6000 - Manual (Page 322)

Chapter 12 Installing, Removing, and Replacing
Removing and Replacing the Library Control Blade and LCB Compact Flash Card
Dell PowerVault ML6000 User’s Guide 322
5
If the new LCB and compact flash card came in discrete packages,
insert the new compact flash card into the new LCB.
6
Insert the new LCB into the vacant LCB slot on the back of the library.
When inserting the new LCB into the slot, be sure that the LCB LEDs
are located at the top of the blade, and that the latch hooks are on the
right side of the blade.
When sliding the new LCB into the slot, there should be no
resistance.
1 LCB compact flash card
Caution: Do not force the LCB into the slot or damage may
occur.