Configuring and viewing the media security log – Dell PowerVault ML6000 User Manual
Page 140
Chapter 6 Advanced Reporting
Configuring and Viewing the Media Security Log
Dell PowerVault ML6000 User’s Guide
140
Note: To e-mail a saved report from the Web client, you must save the report, and then go to
another page in the web client. Return to the report viewer page, scroll down to the
bottom of the report viewing screen to a box titled
Retrieve the Report Data File
, and click
.
4
To e-mail the report data as a .csv file, type the name of a recipient in
the empty field next to the
button, then click
.
Figure 17 Saving and
E-mailing the Report Data
Configuring and Viewing the Media Security Log
Media removal is detected by the library when it performs an inventory
(at boot up; after an open door is closed, etc.). The media security log lists
media that have been removed from the library. You can enable the
library to collect information about media removal, and then view, save,
and/or e-mail the log.
You can configure the library to collect any or all of the following
information. By default, the library collects nothing and the log is empty.
You must select each item you want the library to collect:
•
Unexpected Removal Detection After Power-up and Reboot Only
•
Unexpected Removal Detection During Library Operation
•
Expected Removal Detection From I/E Slots During Library Operation
Note:
Unexpected removal
refers to tape cartridges that were
removed from the library without being properly exported via
the I/E station.
Expected removal
refers to tape cartridges that were exported
properly via the I/E station.