Dell PowerVault ML6000 - Manual (Page 284)

Chapter 12 Installing, Removing, and Replacing
Preparing to Remove or Replace a Module
Dell PowerVault ML6000 User’s Guide 284
13
Remove all power supplies from each module that you intend to
remove. For details, see Adding, Removing, and Replacing Power
Supplies on page 330.
14
Remove all tape drives from each module that you intend to remove.
If you are going to replace the module, label the drives with their
locations so you can re-install them in the same locations later. For
details, see Adding, Removing, and Replacing Tape Drives on
page 354.
1 Parking tab in “parked” position